Keep fertigation records in GrowData, to track applications and fertiliser inventory usage
Setup Items to have completed first:
1. Go to Enter Data > Fertigation
2. Enter in your details:
A = Enter the date of application
B = Select your Supervisor from the list
C = Select if the application was completing AM or PM
D = Select your Operator from the list
E = Select if you are applying the Fert at a rate per hectare, per tree or entering the total quantity used
F = Select your fertilisers from the list, and enter the rate of application
3. Select your Blocks
Click the Select Blocks button > select the blocks on your list (hold down your ctrl key to select multiple) > then select Apply Fertiliser to Blocks.
Important notes:
- If you have blocks linked to valves, you will see these valves pop up in the block selection screen.
- If you select blocks and they do not pull through when you select apply - it's likely because you haven't got emitters in the block setup. See Irrigation Setup for more info.
4. Complete the job
If you are allocating the job to an operator, you can also print an Instruction Sheet. If you are simply entering a record that has already been done, change the status from planned to completed.